| Smart 3-Stages SLA Battery charger | |||||||||||||||
| ITEM | UNIT | SPECIFICATION | REMARK | ||||||||||||
| INPUT | |||||||||||||||
| 01 | Rating Input Voltage | V ac | 200~240Vac 50-60Hz | ||||||||||||
| 02 | Input voltage range | V ac | 180~264Vac | ||||||||||||
| 03 | Rating Input Current | A | 2.0Arms | 220Vac | |||||||||||
| 04 | Max.input power | W | 900.0W | ||||||||||||
| OUTPUT | |||||||||||||||
| 05 | Rating output voltage | V dc | 14.6V | ||||||||||||
| 06 | Output voltage range | V dc | 0VDC~14.6VDC | ||||||||||||
| 07 | Suit with Battery type | 12V and capacity 200~500Ah | |||||||||||||
| 08 | Charging current(stage1) | A | 50.0±5.0 | ||||||||||||
| 09 | Charging voltage(stage2) | V | 14.3-14.8V | ||||||||||||
| 10 | Floating voltage(stage3) | V | 13.5-13.8V | ||||||||||||
| 11 | Cut-off current(stage2→3) | A | 3-7A | ||||||||||||
| 12 | Typical charging time | hour | Fast charge 2hours Slow charge 10hours | ||||||||||||
| 13 | Max.output power | W | 750.0W | ||||||||||||
| 14 | Hold-on time | ms | NC | Input:220Vac Output:Full load | |||||||||||
| 15 | Ripple current | mA | 2000 | Input:220Vac Output:Full load | |||||||||||
| 16 | Charge finish condition | I<7A | |||||||||||||
| 17 | LED1 color | Red,charger temperature is more than 50℃ | |||||||||||||
| 18 | LED2 color | Red:charging Green:finish/idle | |||||||||||||
| 19 | Output protect | - | OCP&OVP&Polarity error protection | ||||||||||||
| 20 | Output voltage¤t display | Digital meter display,display the voltage¤t by switch | At max.load | ||||||||||||
| 21 | Efficiency | % | 80%(Typical) | At max.load | |||||||||||
| Environment | |||||||||||||||
| 22 | Operate temperature | ℃ | 0~+40 | Full load&natural convection | |||||||||||
| 23 | Operate humidity | %RH | 20~90 | Relative humidity,non-condensing. | |||||||||||
| 24 | Storage temperature | ℃ | -40~+70 | ||||||||||||
| 25 | Storage humidity | %RH | 10~95 | Relative humidity,non-condensing. | |||||||||||
| 26 | Cooling | - | fan force cooling only when charging | ||||||||||||
| 27 | Temperature factor | % | -- | ||||||||||||
| 28 | Vibration resistance | 5MM/50HZ/600S | Non-operating condition. | ||||||||||||
| 29 | Impact resistance | 1 meter drop test>=3 times | Non-operating condition. | ||||||||||||
| Mechanical | |||||||||||||||
| 30 | Weight | g | 3500 | ||||||||||||
| 31 | Size | mm | 250*150*88 | Casing only | |||||||||||
| 32 | Connectors | - | Defined when order | ||||||||||||
| Safety | |||||||||||||||
| 33 | Max.temperature rise | ℃ | <30 on casing | At any line and Max.Load | |||||||||||
| 34 | Safety standards | - | CE(EN62368-1:2014+A11:2017) | ||||||||||||
| 35 | EMC standard | - | CE(EN 55032,EN 55035) | ||||||||||||
| 36 | MTBF | hrs | 40000 | ||||||||||||
| 37 | Limited power source | VA | - | ||||||||||||
| 38 | ESD | Kv | 8.0 | ||||||||||||
| 39 | Hi-Pot Insulation | v | Input to Output:1800Vac(1 min.) | For final nuit,cut-off current=10mA | |||||||||||
Hotlines
13714045926
6/FB Blg,PingTaiChang Technology Park,Xiong Yu Road,YanLuoAdd:Street,SongGang Town,BaoAn District,ShenZhen,China
Email：wilstar_yuan@fhy-power.com
Copyright © 2023 Shenzhen Rich China Power Electronics Technology Co., Ltd
