| Smart 2-Stages Li-ion Battery charger | |||||||||||||||
| ITEM | UNIT | SPECIFICATION | REMARK | ||||||||||||
| INPUT | |||||||||||||||
| 01 | Rating Input Voltage | V ac | 100~240Vac 50-60Hz | ||||||||||||
| 02 | Input voltage range | V ac | 90~264Vac | ||||||||||||
| 03 | Rating Input Current | A | 0.4Arms | 220Vac | |||||||||||
| 04 | Max.input power | W | 45.0W | ||||||||||||
| OUTPUT | |||||||||||||||
| 05 | Rating output voltage | V dc | 12.6V | ||||||||||||
| 06 | Output voltage range | V dc | 0VDC~12.6VDC | ||||||||||||
| 07 | Suit with Battery type | 11.1V Li-ion battery charger and capacity>3000mAh | |||||||||||||
| 08 | Charging current(stage1) | A | 3.0±0.3 | ||||||||||||
| 09 | Charging voltage(stage2) | V | 12.5-12.75V | ||||||||||||
| 10 | Cut-off current(stage1→2) | A | 0.2-0.4A | ||||||||||||
| 11 | Typical charging time | hour | Fast charge 2hours Slow charge 5hours | ||||||||||||
| 12 | Max.output power | W | 37.8W | ||||||||||||
| 13 | Hold-on time | ms | NC | Input:220Vac Output:Full load | |||||||||||
| 14 | Ripple current | mA | 100 | Input:220Vac Output:Full load | |||||||||||
| 15 | Charge finish condition | I<0.4A | |||||||||||||
| 16 | LED color | Red:charging Green:finish/idle | |||||||||||||
| 17 | Output protect | - | OCP&OVP&Polarity error protection | ||||||||||||
| 18 | Efficiency | % | 75%(Typical) | At max.load | |||||||||||
| Environment | |||||||||||||||
| 19 | Operate temperature | ℃ | 0~+40 | Full load&natural convection | |||||||||||
| 20 | Operate humidity | %RH | 20~90 | Relative humidity,non-condensing. | |||||||||||
| 21 | Storage temperature | ℃ | -40~+70 | ||||||||||||
| 22 | Storage humidity | %RH | 10~95 | Relative humidity,non-condensing. | |||||||||||
| 23 | Cooling | - | Natural convection | ||||||||||||
| 24 | Temperature factor | % | -- | ||||||||||||
| 25 | Vibration resistance | 5MM/50HZ/600S | Non-operating condition. | ||||||||||||
| 26 | Impact resistance | 1 meter drop test>=3 times | Non-operating condition. | ||||||||||||
| Mechanical | |||||||||||||||
| 27 | Weight | g | 350 | ||||||||||||
| 28 | Size | mm | 120.0*60.0*38.0 | Casing only | |||||||||||
| 29 | Connectors | - | Defined when order | ||||||||||||
| Safety | |||||||||||||||
| 30 | Max.temperature rise | ℃ | <40 on casing | At any line and Max.Load | |||||||||||
| 31 | Safety standards | - | UL1310,CE(EN60335-2-29) ,SAA | ||||||||||||
| 32 | EMC standard | - | FCC,CE(EN55014),C-TICK | ||||||||||||
| 33 | MTBF | hrs | 40000 | ||||||||||||
| 34 | Limited power source | VA | - | ||||||||||||
| 35 | ESD | Kv | 8.0 | ||||||||||||
| 36 | Hi-Pot Insulation | v | Input to Output:3000Vac(1 min.) | For final nuit,cut-off current=10mA | |||||||||||
Hotlines
13714045926
6/FB Blg,PingTaiChang Technology Park,Xiong Yu Road,YanLuoAdd:Street,SongGang Town,BaoAn District,ShenZhen,China
Email：wilstar_yuan@fhy-power.com
Copyright © 2023 Shenzhen Rich China Power Electronics Technology Co., Ltd
